Table of Content
You must always enter a voice command in the app, but if you schedule your Routine, it will start at the set day and time without the voice command. Needless to say, you can easily swap between a 2.4GHz/5GHz network whenever you want. To do this, all you have to do is to access your router’s settings. Under these settings, make your way to Wi-Fi settings.
For example, use "Desk Light" instead of "Bedroom Desk Light." If you can't find your lights, force close the Google Home app and try again. You might not be a member of the home that the bulb was set up in. Ask the person who created the home to add you as a member. The bulbs must be turned on before you continue. To create or change a nickname, open the Google Home app .
Merkury smart bulb unboxing & setup
They are the latest trend in the tech world since they make our home lives more comfortable. In this article, I taught you how to set up smart light bulb with Google Home, which is a pretty easy task. Imagine not having to get up to turn on and turn off the lights and being able to set the ambiance of your home accordingly. The next step when learning how to set up smart light bulbs with Google Home is to set up the actual smart light bulb.
Make sure you have the latest version of the Google Home app. Touch and hold the bulb's tile you want to add to a room. Click on Add + found at the top left corner, and choose Set Up Device, followed by Work with Google.
How To Measure Recessed Lighting Size In Seconds
The app also lets you group multiple bulbs together for easy control. When you choose Made for Google light bulbs, you can set them up from start to finish in the Google Home app. You won't need a bridge or hub or the bulb maker’s app. After going through these steps, you should be able to successfully control your smart lights through both your speaker as well as the display.
Once you have confirmed that your light bulb is compatible, open the Merkury app and tap on the “Add Device” button. Follow the on-screen instructions to complete the setup process. Once your light bulb is connected, you’ll be able to control it using Siri voice commands or through the Merkury app.
Connect Merkury Smart Bulb with Google Home
In the Geeni app, on the top corner of the Devices screen, click (+). Just make sure that the bulb has power and turn it on. Then we can proceed to the next step. At the top right, tap Settings Remove device Remove. At the top right, tap Settings Home choose a home tap Next choose a room tap Next.
You should get a prompt about setting up your smart lights, during which your bulb might blink a couple of times. The app is available for both Android and iOS devices. The app allows you to do more than just turn the lights on and off. You can also dim the lights, set timers, create schedules, and even change the color of the light. Second, check to see if there are any other devices using the same frequency as your light bulb. If so, try disconnecting those devices and see if that clears up the connection issue.
Merkury light bulbs are one of the most popular types of LED bulbs on the market. They are known for their long life span and energy efficiency. However, many people do not know how to properly connect them. Resetting the bulb should not be a hassle and you won’t need anything you don’t have at your home. However, each smart bulb has its own different technique. Each smart bulb manufacturer has their own little technique of resetting the bulb.
There are three types of MERKURY light bulbs- LED, CFL, and incandescent. That is all you will need to factory reset the merkury bulb. You don’t need any fancy tech like a smart hub or anything to reset your merkury bulb. (This will remove all your GE bulbs. This currently doesn't support the removal of individual C by GE light bulbs). To create any Routine, enter the voice command you'll use to tell the Google Assistant to start the Routine.
You can now control your lights with your speaker or display. Besides this, we have also added a few instructions about how you can troubleshoot the smart light in case it is showing connectivity issues. You will have to choose the room where your light bulb is located. To create a custom room, go to “Add custom room”, where you will be prompted to enter the room name. If that doesn’t work either, force close the app and factory reset the app. Following, you will be asked to make unique names for your bulbs.
You will need the ‘Tuya’ app, yes the bulbs are ‘Merkury’ and use the ‘Geenie’ app, but you must set up with the ‘Tuya’ app. If the bulbs were already paired to the Geenie app, they need to be removed from the app and factory reset . These bulbs, along with the Merkury smart switches are both on sale for Black Friday and Cyber Monday for $9.99. Maybe if me spread the word it will help attract attention. The switches are normally $19.99 so that’s the value.
The app will ask you whether your bulb is blinking quickly or not. Choose the applicable option and then enter your WIFI password. These bulbs are ‘hub-less’ so the state is stored on the Tuya servers, both Geenie and Tuya store account info in the same database more or less. This is why the accounts need to be separate and the bulbs removed completely from the Geenie app . You can use Routines to schedule your lights and control multiple lights with one voice command.
Merkury bulbs are compatible with 2.4GHz networks only. Get your phone out and connect to a 2.4GHz WIFI network. Trust us a 5 GHz won’t work with the merkury bulbs, we have tried that. Then open the Geeni app on your smartphone.
No comments:
Post a Comment